Solar module holders for flat roofs. Highest quality.

When installing solar power plants with metal brackets and sidewalk tiles, roofers void their warranties, because metal structures, when heated strongly in hot summers, damage the roof covering - dents appear, the covering is torn. However, this ballast bracket system has 160 times lower thermal conductivity, effectively retains heat radiating from the PV modules and keeps the roof healthy. We will give you this excellent structure if your metal roofing is already perforated.

FEATURES
* Does not heat up, does not damage the roof covering;
* Thick, porous, with drainage grooves SBR rubber sole;
* Good adhesion to slippery roof covering;
* Low load on the roof;
* Also suitable for soft roofs;
* No thresholds, no sharp edges;
* Good cooling of PV modules;
* Only three parts, quick, easy installation.

The system is aerodynamic, stable in strong winds, does not slip, and the wind board and snow caliper stop the harmful resonant vibration of PV modules.

FEATURES
PV module installation angle - 15⁰
Row spacing - 0.6 m
Block weight - 30 kg
Total roof load - 20 kg/m2
Wind speed resistance up to - 45 m/s
Thermal conductivity coefficient - 1.1 W/m2K
PV module position - horizontal.

When installing in the east-west direction, windbreaks are not required. We recommend choosing solar modules no longer than 1.8 m. and with thicker glass, because they are much stronger.

SOLAR CONCRETE HOLDER -  € 33 + VAT
Granite, sand, cement CEM II/A-LL 42.5R
Inert aggregates
Technological additives
Reinforcement
Polypropylene fiber
Fastening units - M8, stainless steel A2
Ground quartz sand
Iron oxide
Polycarboxylic superplastic
Other materials
Frost resistance (according to LST L 1428.17:2005) ≥ 100 cycles (F100)
Compressive strength class (according to EN 206:2004) - C50/C60
Warranty provided - 30 years.

WIND SHIELD -  € 11 + VAT
Anthracite, dark grey RAL 7016
Sheet thickness - 0.7 mm
Coating thickness - 50 μm
UV resistance - RUV4
Coating is resistant to photochemical aging processes
Excellent corrosion resistance
Warranty - 30 years.

MAT -  € 2.6 + VAT
Rubber, protective
Dimensions - 500x250x30
SBR granules, polyurethane glue. Harmless
UV resistant
Porous, with drainage grooves at the bottom
Warranty - 2 years.